I can't configure RSLinks for a SLC 5/04, please help.

[GEORGE D]

Hello Mickey, hello OKiePC

Hello Mickey and hello OKiePC thank to your help I did download the program from the 5/04. But it is not over yet, now I do have problems with the PV550-b5a5. I am working with PanelBuilder 32 Ver 03.80.00. I connected alright, I uploaded alright, but I could not be able to save the program because there were "To many exceptions" message and it did not allowed me to save it and work with it. There were around 20 exceptions like "certain object was not assigned to the data base" ,etc. Any suggestions?

Thank you for you help!
George

 

[GEORGE D]

Hello Mickey, hello OKiePC

Hello Mickey and hello OKiePC thank to your help I did download the program from the 5/04. But it is not over yet, now I do have problems with the PV550-b5a5. I am working with PanelBuilder 32 Ver 03.80.00. I connected alright, I uploaded alright, but I could not be able to save the program because there were "To many exceptions" message and it did not allowed me to save it and work with it. There were around 20 exceptions like "certain object was not assigned to the data base" ,etc. Any suggestions?

Thank you for you help!
George

 

[Mickey]

I uploaded alright

Did you get a .PVA file somewhere on your PC? If so can you zip it and post it here?