hassanazhar92
Member
Dear All,
I have a KUKA Palletizer machines having Iconics Genesis SCADA installed on its PC.
It remained closed for about 7 to 8 years.
We are now trying to make it operational.
Its program is running fine, servo drives are communicating with it properly via ethernet.
But profibus is not communicating.
It has the Soft Plc programmed and it is the master. It has Hilscher CIF 50-PB card (installed on PCI SLOT) which acts as the profibus master. Danfoss FCD307 and Siemens IM153-1, are installed as profibus slave.
None of them is communicating.
I have verified their addressess and cables. I think the problem lies on PC side.
Anybody has Some experience, please help me out. Thanks
I have a KUKA Palletizer machines having Iconics Genesis SCADA installed on its PC.
It remained closed for about 7 to 8 years.
We are now trying to make it operational.
Its program is running fine, servo drives are communicating with it properly via ethernet.
But profibus is not communicating.
It has the Soft Plc programmed and it is the master. It has Hilscher CIF 50-PB card (installed on PCI SLOT) which acts as the profibus master. Danfoss FCD307 and Siemens IM153-1, are installed as profibus slave.
None of them is communicating.
I have verified their addressess and cables. I think the problem lies on PC side.
Anybody has Some experience, please help me out. Thanks