glenncovington
Lifetime Supporting Member
Our plant has an Idec FA-1 PLC in a piece of equipment. One output appears to be miss firing or staying on when it shouldn't. It seems to be related to temperature in the cabinet.
Does anyone out there have the ability (software and cable) to hook up and extract the program from this PLC? Can anyone point me to a place to buy the software and cable? I just want to get at the program as a minimum so a possible retrofit could be made.
Thanks,
Glenn
Does anyone out there have the ability (software and cable) to hook up and extract the program from this PLC? Can anyone point me to a place to buy the software and cable? I just want to get at the program as a minimum so a possible retrofit could be made.
Thanks,
Glenn