Abdul Wahab
Member
is here any member who have experience on m580 modicon pLC
is here any member who have experience on m580 modicon pLC
Cant you connect using the usb port? then upload the program?
Which port of the PLC are you connecting to, the CPU ports, a NOC, NOS etc ?
The M580 has lots of cyber security implementations and all services are OFF by default (not sure about ICMP i.e. ping) so depending what protocol or service you need access to it may not even be possible to connect to it, assuming its all setup to talk you have a couple of options
Open the program using Unity Pro, if you don't have that and can reboot the PLC then use wireshark to look for an ARP request, failing that and if you have half an idea of the range that its in use an IP scanner as above
i am using service port , is there any way to reset this plc manually or dip switch or any other method
No.
But if USB isn't working then there is something weird going on.
that is what in which i am stuck currently , and do not know what to do next ,
You haven't really given us a lot to go on, for instance is this a new CPU, has it already got an application in it, what version of Unity Pro are you using to try and connect etc. etc.
I would suggest talking to Schneider tech in your country would be the next step.
https://www.schneider-electric.com/en/faqs/FA242433/
Have you looked at these FAQs on schneider website?