spacecoolaid
Member
Hello, using Ignition I want to automatically change the time zone for 30 Allen Bradley plc's at the same time, is there an efficient way to do that or even a way through Ignition gateway?
Ignition 8.1 - Time Zone
- Thread starter spacecoolaid
- Start date
OkiePC
Lifetime Supporting Member
Go here:
https://compatibility.rockwellautomation.com/Pages/home.aspx
In the search bar, enter "Logix5000 Clock Update Tool"
That software will allow you to pick controllers and schedule times to update their clocks based on the time zone of the PC on which it is running.
https://compatibility.rockwellautomation.com/Pages/home.aspx
In the search bar, enter "Logix5000 Clock Update Tool"
That software will allow you to pick controllers and schedule times to update their clocks based on the time zone of the PC on which it is running.
the_msp
Lifetime Supporting Member
Can you do it from Ignition?
Yes: https://forum.inductiveautomation.com/t/syncing-gateway-clock-to-plc-clock/12279
Should you? That's your call.
Yes: https://forum.inductiveautomation.com/t/syncing-gateway-clock-to-plc-clock/12279
Should you? That's your call.
Similar Topics
Hi, I have questions. I have Analog Input that need to put into Ignition Designer. But I don't know how to put?
Hey guys. We've been learning Ignition and going through all the courses on Inductive University. I really like the software and the things you...
Hardware: 5069-L320ERMS2
Software: Logix Designer 35.11 / Ignition 8.1
Issue: When attempting to write to the tag "HMI_DRV200_DynamicTrim" in...
Hi all, happy new year!
I read a topic lately and many more before that where a lot of people saying that Ignition is damn good SCADA, so I...
With Wonderware, IFIX, FactoryTalk View, etc., it's very easy to have multiple HMIs, each with their own independent control, looking at the same...