IM 153-2 with CP340 in SWR

orense

Member
O
Join Date
Apr 2006
Location
Norway
Posts
196
Hi,

I am planning to use the 300 series in redundacy by using two cpus, and IM153 modules in Profibus DP.

I am having some problems with my ASCII communication to the CP340 in one of the IM153 racks, and am wondering if anybody can confirm whether the software redundancy solution supports using the CP340 in the IM153 rack?


Thanks!
 

Similar Topics

A
Siemens IM153-1 Interface Module
On the Siemens IM153-1 Interface Module, ET200M, what is the difference between the "0 X-18/19/20" and the "1 x-8/9/10? Picture attached of the...
Replies
1
Views
1,280
Agusa
A
T
Im153-4pn
Hi All Good morning, I need an urgent help. I'm at the sight over the weekend and can't get hold of technical support. Problem is I have...
Replies
2
Views
1,691
JesperMP
JesperMP
K
red line on siemens IM153-2 online
when we go online in the simatic hardware configuration, we have an et200 station IM153-2 redundant, which has a small red line at its top left...
Replies
3
Views
1,972
Kataeb
K
G
IM153-2 and DP/PA coupler and IO
The machine now: - 1st S7-rail with CPU and 8 IO-modules - 2nd rail with IM153-2 and DP/PA coupler(FDC 157-0) My question: we need another...
Replies
1
Views
1,526
mk42
M
M
S7-300 with IM153-4
I'm using TIA as software , after configuration S7-315 and connected with IM153-4 by profinet ,and download and go online , all the modules which...
Replies
7
Views
2,562
JesperMP
JesperMP
Back
Top Bottom