The Plc Kid
Member
I have a customer that has a contrologix L61 that is mastering a rack of SLC IO by means of a 1756-DHRIO in the contrologix and a 1747-ASB in the SLCside from what I understand there used to be a 5/04 running this conveyor system and they upgraded to contrologix to have ethernet. Go Figure. Anyway the 1756 chasis is full and they are all 32 point modules and the SLC chasis has 1 slot open.
This system runs all the high speed conveyors in the plant and they can't shut it down and it is a 24/7 operation. We may be able to shut it down for 1 or maybe 2 minutes but thats it.
If iI shut it down and plug a a slc 16 point ac input module into that slot does anything need to reconfigured on the 1756-DHRIO card are in the L61?
Are there any dip switch canges that have to be made on the 1747-ASB?
From what I read I don't think so but I wanted to ask before I did this on such a critical system.
This system runs all the high speed conveyors in the plant and they can't shut it down and it is a 24/7 operation. We may be able to shut it down for 1 or maybe 2 minutes but thats it.
If iI shut it down and plug a a slc 16 point ac input module into that slot does anything need to reconfigured on the 1756-DHRIO card are in the L61?
Are there any dip switch canges that have to be made on the 1747-ASB?
From what I read I don't think so but I wanted to ask before I did this on such a critical system.