jhuggart
Member
I am using a ti505 with Tisoft6.3 to send commands over profibus to a Delta Motion RMC75P. The problem I am having is that the command parameters for the motion control must be in real number format and I cannot figure out how to convert from an integer to a real number in the 505. The values that will need to be converted are stored in v-memory.
Does anyone have any suggestions? If so, I would greatly appreciate some example code.
edit: By the way, I understand how real numbers work and that two words are required for their storage. I just can't figure out how to make the integer transfer from one word into two words in real format.
Does anyone have any suggestions? If so, I would greatly appreciate some example code.
edit: By the way, I understand how real numbers work and that two words are required for their storage. I just can't figure out how to make the integer transfer from one word into two words in real format.
Last edited: