kelvinviroja93
Member
Hello there,
I am new to OMRON PLCs so need some help to communicate two PLC over FINS Protocol.
Here are the description of the system...
PLC1-
CJ2M-CPU33
IP- 10.113.218.34
SUBNET-255.254.0.0
UNIT NO - 00 (set the dial available on the CPU in HEX)
NODE - 22 (set the 2 dials available on the CPU in HEX)
PLC2-
CJ2M-CPU33
IP- 10.113.218.35
SUBNET-255.254.0.0
UNIT NO - 00 (set the dial available on the CPU in HEX)
NODE - 23 (set the 2 dials available on the CPU in HEX)
Now, what i have to do is to transfer the D100 to D110 from PLC1 to PLC2's D200 to D210 and Transfer the D100 to D110 from PLC2 to PLC1's D200 to D210 over FINS only and not on Ethernet/IP.
I have tried RECV and ECHRD blocks but didn't succeed yet.
Two CPU are connected over ethernet via a industrial switch.
IO table screenshot attached, same for PLC1 and PLC2.
I am new to OMRON PLCs so need some help to communicate two PLC over FINS Protocol.
Here are the description of the system...
PLC1-
CJ2M-CPU33
IP- 10.113.218.34
SUBNET-255.254.0.0
UNIT NO - 00 (set the dial available on the CPU in HEX)
NODE - 22 (set the 2 dials available on the CPU in HEX)
PLC2-
CJ2M-CPU33
IP- 10.113.218.35
SUBNET-255.254.0.0
UNIT NO - 00 (set the dial available on the CPU in HEX)
NODE - 23 (set the 2 dials available on the CPU in HEX)
Now, what i have to do is to transfer the D100 to D110 from PLC1 to PLC2's D200 to D210 and Transfer the D100 to D110 from PLC2 to PLC1's D200 to D210 over FINS only and not on Ethernet/IP.
I have tried RECV and ECHRD blocks but didn't succeed yet.
Two CPU are connected over ethernet via a industrial switch.
IO table screenshot attached, same for PLC1 and PLC2.
Last edited: