Caveman
Member
Next spring I plan to build my version of the Jumping Water.
I think I have everything that I need to do this (plc's are
Modicon 984 A130 w/2k mem and SLC 5-01 w/1k mem).
There are going to be three towers aranged in a triangular
form with water jumping back and forth and crashing.
My question is, what function blocks do I need to learn to do
this? I can do timmers, counters, compares, and drums (can more
than 1 drum be in a program using the same outputs?)
Hopfully someone here has done this kind of project and would
just help me get the grey matter going.
Just as note I recently changed jobs. Johnson Controls, Cadiz, Ky.
in Maintenance. They are looking for more too, Just pass the test.
Lots and lots and lots of welding robots (Panisonic and MotoMan).
I think I have everything that I need to do this (plc's are
Modicon 984 A130 w/2k mem and SLC 5-01 w/1k mem).
There are going to be three towers aranged in a triangular
form with water jumping back and forth and crashing.
My question is, what function blocks do I need to learn to do
this? I can do timmers, counters, compares, and drums (can more
than 1 drum be in a program using the same outputs?)
Hopfully someone here has done this kind of project and would
just help me get the grey matter going.
Just as note I recently changed jobs. Johnson Controls, Cadiz, Ky.
in Maintenance. They are looking for more too, Just pass the test.
Lots and lots and lots of welding robots (Panisonic and MotoMan).