Hi Gents
I need some help, Keyence UK is not supporting Keyence PLCs in the UK anymore, I have programmed an operation in Ladder with a 24 bit high speed counter, I am struggling to read the counter output in the 24 bit mode, I can only read the lower order bit as if I am using a standard 16 bit HS counter. I have tried different stuff to no avail. The high and low order bits are being registered in Data memories 1900 & 1901 I believe, I need to read the complete number in both data memories and display it on an HMI. Anyone out there who is familiar with the Keyence animal
I need some help, Keyence UK is not supporting Keyence PLCs in the UK anymore, I have programmed an operation in Ladder with a 24 bit high speed counter, I am struggling to read the counter output in the 24 bit mode, I can only read the lower order bit as if I am using a standard 16 bit HS counter. I have tried different stuff to no avail. The high and low order bits are being registered in Data memories 1900 & 1901 I believe, I need to read the complete number in both data memories and display it on an HMI. Anyone out there who is familiar with the Keyence animal