I found problem in The PLC DL205-1 is using the protocol K-sequence and I'm try changing to DirectNet protocol that i can config to get success.
So,I write the detail about this with step by step.
I think it is valuable to friends.
http://omron-plc.com/2009/06/11/switch-protocol-koyo-plc-sequence-directnet/
So,I write the detail about this with step by step.
I think it is valuable to friends.
http://omron-plc.com/2009/06/11/switch-protocol-koyo-plc-sequence-directnet/