AllanJacobs
Member
I have setup an instruction up between CNTL logix and PLC5's before but this has me stumped. i have a L32E v20 plc and a 5/40E ser C rev J. I am try to do a PLC5 Type read from the PLC 5.
path; LocalENB, 2, 10.103.104.170
the ip and mask are on the same sceme
is it the version of PLC5 or something else?
path; LocalENB, 2, 10.103.104.170
the ip and mask are on the same sceme
is it the version of PLC5 or something else?