LC Calibration on fatek plc with 2LC Module

Assad

Member
A
Join Date
Aug 2016
Location
karachi
Posts
2
Hi everyone,
i hope you are doing well
i am using fbs 2lc module , i have calibrated the weight by calibrated weight but my value is not consistent.
can any one give me some advice or remedy or perfect procedure to follow?
 

Similar Topics

K
Omron AD081-V1 Analog Input Card Calibration (Offset & Gain Adjustment)
Omron AD081-V1 Analog Input Card Offset & Gain Adjustment Entering Adjustment Mode 1. Set the input card in adjustment mode (Turn ON Dip SW No-1)...
Replies
0
Views
92
Ko Lin
K
M
Siwarex ms calibration
Hello, I have a problem calibrating siwarex ms with siwatool ms Whatever I have tried, I have communication error and numerous retries to...
Replies
0
Views
76
Mrneverwhere
M
D
4/20ma Sensor scaling/calibration
5069 IF8 with a 4-20ma 0-100psi, sealed fixed, no calibration, transducer attached. IF8 is scaled 4ma= 0 psi, 20ma=100psi. If over time the...
Replies
12
Views
2,637
drbitboy
drbitboy
J
0-5 vdc for calibration
I am in need of a calibrator to provide a variable 0-5 vdc output? any suggestions? Thanks
Replies
5
Views
1,669
Jim G.
J
T
Strain gauge calibration and force distribution.
This is 99% a structural design flaw, but most people here have the capacity to manage this. First, some R&D background. I have a strain gauge...
Replies
5
Views
1,496
Peter Nachtwey
Peter Nachtwey
Back
Top Bottom