Mrneverwhere
Member
Hello,
I have a problem calibrating siwarex ms with siwatool ms
Whatever I have tried, I have communication error and numerous retries to connect.
I am using FTDI based USB to rs232 adapter, and I have made the cable, with 2-3,3-2,5-5 pinout.
I have 24volts on the module.
Is there any other thing I should tace care of?
I have a problem calibrating siwarex ms with siwatool ms
Whatever I have tried, I have communication error and numerous retries to connect.
I am using FTDI based USB to rs232 adapter, and I have made the cable, with 2-3,3-2,5-5 pinout.
I have 24volts on the module.
Is there any other thing I should tace care of?