Lenze displays CL. motor 20 rpm

daveinarmstrong

Member
D
Join Date
Oct 2007
Location
Armstrong
Posts
4
i am connecting my second motor/Lenze drive today to a 18,000rpm 3ph 220volt 300hz spindle motor and the motor is turning very slowly. The Lenze display shows CL current limit. the motor turns freely by hand and the current limit has been increased to 100. I am trying to run this motor at 300Hz. Any one else run into this problem with a Lenze drive?.
Thanks for your help.
 
Last edited:

Similar Topics

Suhail
help me out to connect lenze i700 to PC
Hi friends, i need a help to know the procedure and steps to connect Lenze i700 to PC for parameterize. i tried with lenze easy-starter using LAN...
Replies
0
Views
53
Suhail
Suhail
T
Lenze 8200 motec inverter
Hi folk, I would like to know what kind of Parameters should I setup for controlling with Profibus. My old Lenze 8200 motec 0.25kW have a busted...
Replies
0
Views
99
tientran
T
K
Siemens S120 drive to control Lenze servomotor
Kindly, has anyone tried to control Lenze servomotors with Siemens S120 drives ? Any special hints ? Have some concerns for the resolver and servo...
Replies
5
Views
249
L D[AR2P#0.0]
L
M
S7300-Lenze 9400 drive communication problem
Hello everyone, One of our machine we use Siemens Cpu315-2dp. And this cpu communicate with 4 Lenze servo drives series 9300 via profibus. Also...
Replies
0
Views
198
Madar
M
G
Lenze GDC 4-14 doesn't have the driver for the system bus
Hello guys, I'm trying to use the Lenze GDC 4-14 with the system bus adapter 2177, but it doesn't appear in the communication window. It's like I...
Replies
0
Views
236
Goiaba_Ninja
G
Back
Top Bottom