Lenze LECOM A/B module EMF2102IBCV001 compatibility

[gaminn]

Hi,
I used to use my Lenze EMF2102IBCV001 LECOM a/B module to connect to many Lenze 9300 series servo drives. Now I would like to connect to Lenze 8200 vector inverters (E82EV371_2C, E82EV552_4C) and I'm not able to establish the connection. When plugged in the Lenze 8200 inverter, LECOM module doesn't even light up its green power on LED.

I use Lenze GDCEasy 4.14 software.

Can you please help? Is EMF2102IBCV001 compatible with Lenze 8200 vector? What module should I use to connect Lenze 8200 vector to my PC?

Thanks

Martin

 

[gaminn]

OK, so I discovered Lenze 8200 vectors have a jumper on the front panel that sets power supply to module connected to the front panel. I set the jumper correctly and now power on LED on the LECOM module lights up. However, GDCEasy still doesn't recognize my inverter. The inverter is set to C0125 = 4 (baud rate = 19200 baud) and C009 = 1 (device address = 1). GDCEasy finds something at 19200 baud rate but then it probably sweeps through device addresses from 1 to 99 and finds nothing. RX LED on LECOM module blinks during that.