Dear,
I need to measure level in wells (40 meters deep), with diameter of 30cm, I have added an hydrostatic level for the measurement of level with trip amplifier/signals splitters to get low level switch. However, in case of malfunctioning of the level transmitter, we need to use a back up for high level, a switch in the well.
wells also include a dewatering pumps, so we don't have a lot of space in the well.
What do you propose type of level switch for high level in the wells which should not exceed 2 meters deep maximum from the ground level.
thank you so much!
Charbel
I need to measure level in wells (40 meters deep), with diameter of 30cm, I have added an hydrostatic level for the measurement of level with trip amplifier/signals splitters to get low level switch. However, in case of malfunctioning of the level transmitter, we need to use a back up for high level, a switch in the well.
wells also include a dewatering pumps, so we don't have a lot of space in the well.
What do you propose type of level switch for high level in the wells which should not exceed 2 meters deep maximum from the ground level.
thank you so much!
Charbel