Hi, I'm new to the website. I use LogixPro. I'm trying to find the symbols for a pressure switch, and a temperature switch. Where do I go in the program to find them, or which ones would I use?
Can you please clarify - are you wanting to know what the symbols are for a pressure switch and a temperature switch, or are you wanting to know how to program them in ladder?
In ladder the symbols are -] [- and -]\[-. All ladder cares about is the status of the bit in the input image, whether it is on or off, it does not care what the physical device is.
Can you please clarify - are you wanting to know what the symbols are for a pressure switch and a temperature switch, or are you wanting to know how to program them in ladder?
In ladder the symbols are -] [- and -]\[-. All ladder cares about is the status of the bit in the input image, whether it is on or off, it does not care what the physical device is.
What I meant is in the I/O simulation, you right click on the input addresses and it changes the symbols. It has two pushbutton symbols,and 2 pressure switch symbols (yeah I don't know why I asked that one). On a PLC schematic the tempurature switch has a square wave below a line. I can't find that symbol on LogixPro