Looking for sofware/manual for Taian TP01

[avz]

Hi all
This is my first post here, I hope that you will be able to help me out.
I have a Taian TP01 (quite old, I know) with which I would like to learn & practice but I can't fint the software for it. please (if you know) let me know if and where I can find it. one more thing that I need is its cable (to pc) connections.
Thanx.

 

[rigicon]

I programmed a TP01 long time ago, I will have to go through my old Hard drives and see if I can find it. The port was Rs232 and Rs422 so if memory serves me 2=Tx 3=Rx 5=Gnd standard Rs232. Chinese Taian don't know if still available.

 

[avz]

Rigicon
Thanx for your response. I'm crossing fingers in hope that you'll find it.

 

[rigicon]

Taian = PC12 Design centre

Hi AVZ.
Here is the PC12 design software it runs but then bombs out when tryimg to load program./, The help file works and there is some of my very old programs long time ago. On the about is an email of the programmer who wrote the software send him an email i remember the software was free.
I think it must be run in win 95 or 98 maybe the setup is missing or a dll is playing up anyway i'll carry on looking for the original CD.

http://hotfile.com/dl/124339399/bb66595/TAIAN.zip.html


Forum link:
[URL="http://hotfile.com/dl/1243393...tfile.com/dl/124339399/bb66595/TAIAN.zip.html[/URL]

HTML link:
<a href="http://hotfile.com/dl/124339399/bb66595/TAIAN.zip.html">http://hotfile.com/dl/124339399/bb66595/TAIAN.zip.html</a>

 

[jrwb4gbm]

I know nothing about this software or cable but did find this link. See page 96 for possible comm info.
http://www.google.com/url?sa=t&source=web&cd=4&ved=0CCwQFjAD&url=http%3A%2F%2Fwww.fujitech.com.sg%2Fimages%2Fhmi%2FDocument%2FGOP%2520PDF%2FCommunication%2520between%2520PLCs%2520and%2520PWS.pdf&ei=laEjTsOEKuPy0gGunuXPAw&usg=AFQjCNG_bVFCIViBixcAQts3pQyX4MpWDQ

Info from page 96:
a.Communication Format :RS232
b.Node Address :0
c.Transmission Speed :9600bps​

d.Transmission Format :8-bit,odd,1-bit

RTS,CTS,DSR jumpered together

Also found another link that says the software is Win95 based.

P.S.
Found a link to download TECO TP3-PCLINK, maybe a newer version of the software, might work, I have no idea.
Link:
http://www.jinlin.com.tw/softfile/TP3-PCLINK setup(V2.0).zip

 

[jrwb4gbm]

Snip....
I think it must be run in win 95 or 98 maybe the setup is missing or a dll is playing up anyway i'll carry on looking for the original CD.

@rigicon
Did you ever find the original CD, missing .dll's, or floppies? I found an old website that listed a couple of floppies but the link was dead. Just curious. Thanks.
Sid

 

[rigicon]

Unfortunately not, I don't think I have them as I looked in the attic puzzling. I'll look some more there must be a download on the internet somewhere ! Haven't seen these PLC's for a long time only got the software as I converted some chineese machines to different brand PLC.

 

[sert09]

Hello myname is Sert I'm Thai and my factory recive old machin from Taiwan ,It use PLC Taian TP11 !!! .My boss he need to know programing inside PLC .IF in future we need to chang to new PLC Brand .But I never used This PLC Brand I only study in Siemens and Allen Bradley . Can sombody help me I want to know abount Software and Cable for upload it . It same TP01 or not? .Thank you very much for any thank and help me ,Thank Thank. Thank .

 

[aganim]

Hi All,
I have the Taian TP02 and I need the PC12 software to program it.
Can anyone help?
Many Thanks!