LS Plc Encoder Module

Robin123

Member
R
Join Date
Jan 2021
Location
Dhaka
Posts
1
I am working with this module xbf-hd02a from LS plc.
I want to hold the encoder count in case of power failure, for this I am setting the present count as the preset count through the PUT (special module write) instruction. Here I have a problem that in PUT instruction I am not able to give more than 16 bits of data
 

Similar Topics

I
Encoder difficulties with H0-CTRIO(2) Module on DL05 PLC
Hi, I am trying to learn how to use my encoder with my PLC. I recently got a high-speed counter module (H0-CTRIO2) for my DirectLogic05 PLC. I...
Replies
5
Views
2,222
StoneMan
StoneMan
S
How to connect absolute encoder to Hsc module of Slc500 Plc?
How to connect the absolute encoder(12 bit resolution) to Hsc module of Slc500 Plc and get raw-data to my ladder logic? Please give me example...
Replies
8
Views
2,711
sinanmoral
S
B
PLC module for rotary encoder
hi guys, am new to this family.. i have one question about plc. the question is how a rotary encoder connect to plc ? and what are the...
Replies
1
Views
1,722
gclshortt
gclshortt
N
Connectivity of NPN encoder with PLC's HSC Module via optocouplers or SSRs
Dear Sirs, An NPN Encoder is connected with a Motor's Shaft and we want to use optocouplers , SSRs or Reed relays at the output of NPN encoder...
Replies
4
Views
4,291
ArikBY
ArikBY
J
SEW EI7C encoder to S71200 PLC
Hi Folks. Has anyone used an SEW EI7C encoder with an S71200 PLC? If yes, how is it done? I use this same encoder in EI76 mode with a...
Replies
0
Views
262
jmartin9
J
Back
Top Bottom