Nauman
Member
Dear Sirs,
An NPN Encoder is connected with a Motor's Shaft and we want to use optocouplers , SSRs or Reed relays at the output of NPN encoder , so that the signal can be readable to the PLC's High Speed Counter module 350-2 of SIEMENS S7-300 PLC. Kindly guide us in this problem that how can we use the optocouplers , SSRs or Reed relays.
Regards
Nauman Pervez
An NPN Encoder is connected with a Motor's Shaft and we want to use optocouplers , SSRs or Reed relays at the output of NPN encoder , so that the signal can be readable to the PLC's High Speed Counter module 350-2 of SIEMENS S7-300 PLC. Kindly guide us in this problem that how can we use the optocouplers , SSRs or Reed relays.
Regards
Nauman Pervez