lesmar96 Lifetime Supporting Member L Join Date May 2017 Location PA Posts 520 May 16, 2017 #1 I am using a Schneider M221 PLC. Is it possible to have 2 Modbus TCP/IP masters pulling information from the same slave? I have 3 plcs on the same network and 2 of them need to receive identical information from the 3rd one.
I am using a Schneider M221 PLC. Is it possible to have 2 Modbus TCP/IP masters pulling information from the same slave? I have 3 plcs on the same network and 2 of them need to receive identical information from the 3rd one.
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 May 16, 2017 #3 http://www.plctalk.net/qanda/showthread.php?t=92475 The above is a thread with a little more explanation. Regards,
http://www.plctalk.net/qanda/showthread.php?t=92475 The above is a thread with a little more explanation. Regards,
lesmar96 Lifetime Supporting Member OP L Join Date May 2017 Location PA Posts 520 May 16, 2017 #4 thank you. That is helpful information