Valera,
I am a bit confused: are you asking what kind of device can perform these types of inspections (bottle shape, fill level etc.) - or you need to know who builds automated inspection machines?
If your question is about the device, I'll concur with BobB - a vision system is the answer, especially if you consider high production rates. There are plenty on the market; my personal choice would be Cognex. Take a look at
http://www.cognex.com Be aware that vision systems are not cheap, one should be ready to spend $5000 to $10000 per station, sometimes even more (the camera, the controller, the lighting, programming etc.) However this cost is easily compensated by high throughput and sharp improvement in quality.
If you asking about the whole machine - as far as I know, most of them are custom-built by variety of automation houses. You should shop around; I am sure if there are no people qualified for that in your own town, you'll find them no further than Moscow. Or Nizhny. Of course, you, as a customer, would be able to specify whatever PLC brand you want to control the machine. Vision systems can communicate with PLCs by variety of means: discrete I/O, DeviceNet, Ethernet etc.