Magelis XBTF034510

bwhite

Lifetime Supporting Member
B
Join Date
Jul 2006
Location
Lakeland, FL
Posts
53
I have a client that is running 2 of these HMI's with the same app on them. I've found out that the memory card appears to be bad in one of them. My question is, do I need the XBTL1000 software to copy the known good card to the new "empty" card, or, can I simply copy the known good card to my laptop and then copy from my laptop to the new card?
Thanks
Ben
 

Similar Topics

C
Magelis 5330 backlight burned
Hello all. We have a slight problem. Shcneider Magelis back light burned out and now it is very difficult to operate. There seems no spare parts...
Replies
4
Views
74
Lare
L
B
Communication error between TM221 with magelis HMIGTO
I am having trouble running the application throught my PLC, tm221me32tk with magelis HMIGTO6310 I have prepared the plc programme, also created...
Replies
0
Views
127
BODUSEYTU
B
1
Magelis HMI not working as intended
Good morning friends. . We are having a problem with one of our machines that have two HMI consoles connected to the same network. They have...
Replies
0
Views
1,131
16000lc
1
EICS
Modicon M238 PLC & Magelis HMI - What software Needed ?
I am looking at a bakery oven that has been dismantled and in storage for unknown time, it was manufactured in 2012 so not that old. my gig is to...
Replies
8
Views
3,646
EICS
EICS
L
Schneider Magelis / Vijeo Designer
Any regular users of the magelis range? If so, anyone have a slick way to do a common popup with a rockwell UDT? My current approach is to just...
Replies
3
Views
1,680
Lare
L
Back
Top Bottom