Jonas Zimmer
Member
Hey guys, new to dealing with major plc faults and wanted to run this past the pros.
I got a major fault.
Description:
Discrete I/o module in slot 6 which is required for the user program is detected as having the wrong I/o count. This could also mean that a specialty card driver is incorrect.
The card in slot 6 is a 4 input analogue card.
Bad card? It's been operating for about 5-7 years. I am not sure what the specialty card driver is incorrect message means...
Major error s:6 = 655h
Last major error s:54 = 655h
Any help is appreciated.
Thanks
I got a major fault.
Description:
Discrete I/o module in slot 6 which is required for the user program is detected as having the wrong I/o count. This could also mean that a specialty card driver is incorrect.
The card in slot 6 is a 4 input analogue card.
Bad card? It's been operating for about 5-7 years. I am not sure what the specialty card driver is incorrect message means...
Major error s:6 = 655h
Last major error s:54 = 655h
Any help is appreciated.
Thanks