darkplc
Member
I would set the small roulette address of the IMC to 1.
A dedicated serial port–which can be field-configured for RS-232,
RS-422, or Allen-Bradley DH-485 communications–is provided for the
man-machine interface (MMI). Connection of the MMI device is via
an AT-compatible DB-9 connector (RS-232 or RS-422) or RJ-45
connector (DH-485), both located on the front panel. If DH-485 is not
used, a multi-unit addressing scheme (Multidrop) allows up to eight
IMC-S/23x motion controllers to share a single RS-422 communication
channel in sophisticated multi-axis systems. The address of each unit
is set by a recessed front panel rotary switch.
If the IMC-S/23x passes its power-up diagnostics, all three status LEDs are turned off and the CPU watchdog LED (System OK) is turned on. At this point, the three status LEDs may be used by the application program for any desired purpose.
Is there a battery in the IMC? I can try to see if there is voltage while I find a cable to connect directly to the imc.
Do you think that with the SLC 1747-UIC, I can use it to connect directly?
If not, what cable do you need?
Thank you for your help despite the discussion we all have together I learn more, Thank you
Serial communication with the IMC-S/23x is via either an RS-232C or
RS-422 serial link to one of two ports. If configured for RS-232C,
operation up to 19.2K baud is possible, while ports configured for
RS-422 can operate at up to 128K baud. A PC/AT-compatible 9-pin
D-type connector is provided for each serial port on the front panel. In
general, the GML software development system for application
programming is connected to serial port A while a serial operator
interface device or runtime display is connected to serial port B.
Thanks for the pdf.
I just translated it with google and I will try to read it again to understand better.
It's not easy for me since I'm discovering the world of this kind of computing. And I'm the only one who can take care of it.
I will already try to equip myself to read the information via a computer knowing that I really have nothing to read.
I'm going to see to place an order on the internet for a cable for the IMC by the way and start setting up a computer or making a virtual computer for it to be simpler.
Then after check if there is a program in the imc and also check the communication of the panelview with the rest of the computer.
Excuse me if English is bad.
I will share here my research and my ideas here for my problem, if you wish.
I was able to see my panelview 550 with this config.
https://scontent-cdt1-1.xx.fbcdn.net/v/t1.15752-9/316169938_1506080593192222_4325916396568578434_n.jpg?stp=dst-jpg_s2048x2048&_nc_cat=106&ccb=1-7&_nc_sid=ae9488&_nc_ohc=J4D8swSsHGAAX_XJVTe&_nc_ht=scontent-cdt1-1.xx&oh=03_AdTofFKbvJ2-8PBAO28-Jt6No0SOCChG28RO6WPwMcMTBQ&oe=63A2CED7
https://scontent-cdg2-1.xx.fbcdn.net/v/t1.15752-9/316046069_854957785659261_6627955147428834196_n.jpg?stp=dst-jpg_s2048x2048&_nc_cat=104&ccb=1-7&_nc_sid=ae9488&_nc_ohc=bX7pYka7sEEAX-3YrQa&_nc_ht=scontent-cdg2-1.xx&oh=03_AdR4hqPNX2wK_cenXA359SSocKkSwFiED5LJO5RCqfepyA&oe=63A2D675
But I see that him and not the slc 500 or whatever.
I don't know if this is normal.
So I tried to put my cable directly to the slc 500 as in the photo the black cable rj45
https://scontent-cdt1-1.xx.fbcdn.net/v/t1.15752-9/315920104_1479927662514166_6058662970047275630_n.jpg?stp=dst-jpg_p1080x2048&_nc_cat=103&ccb=1-7&_nc_sid=ae9488&_nc_ohc=HcM7RjJKv1EAX8-8v66&_nc_ht=scontent-cdt1-1.xx&oh=03_AdQaI-sme32xJOrjElvOA9MXznC_7pzWbLrDNGH01ka8gg&oe=63A2B91B
I got nothing on the software, maybe I'm doing something wrong.
https://scontent-cdt1-1.xx.fbcdn.net/v/t1.15752-9/316049493_446236257587978_4339843944839401810_n.jpg?stp=dst-jpg_s2048x2048&_nc_cat=101&ccb=1-7&_nc_sid=ae9488&_nc_ohc=2PU9LF39760AX-MMW2r&_nc_ht=scontent-cdt1-1.xx&oh=03_AdTxIZbXHNT8NpQNamGWvMJaYD7bNKIe9o4Z7SJw1uEuWQ&oe=63A2B298