Hello,
I am trying to connect a 0-5v pressure sensor to the Micro 810, but I am not getting a clear input voltage reading. I connected the sensor signal wire to terminal I_04 and set the input to AI:00. I am wondering if I am not getting a reading because the Micro 810 wants either a 4-20ma or 0-10v signal. Any help would be appreciated.
Thanks
I am trying to connect a 0-5v pressure sensor to the Micro 810, but I am not getting a clear input voltage reading. I connected the sensor signal wire to terminal I_04 and set the input to AI:00. I am wondering if I am not getting a reading because the Micro 810 wants either a 4-20ma or 0-10v signal. Any help would be appreciated.
Thanks