Hi Experts,
I am new to this forum and have a question regarding AB MircoLogix 1100 Ethernet port IP configuration.
As per the ML1100 User Manual (1763-UM001F, page227), there are two ways to configure the MicroLogix 1100 Ethernet channel 1.
•via a BOOTP or DHCP request at controller powerup
•manually setting the configuration parameters using RSLogix 500 Programming Software
I have successfully configure the Ethernet Port by above methods. however, I found a company internal document suggesting the IP address of ML1100 can be modified by using RSLinx.
I have the ML1100 (IP configured, BootP & DHCP disabled) shown on RSLinx, but when I right click on the ML1100; there is no "Module Configuration" option appeared.
The version of my RSLinx (Classic Lite)is 2.59.01 CPR9 SR5 and the ML1100 is 1763-L16BBB B/14.00.
ML1100 is directly connected to my laptop with a single Ethernet cable.
Can anyone tell me if RSLinx can be used to configure IP address of ML1100?
Any suggestion is appreciated.:nodi:
Regards,
Freshmeat
I am new to this forum and have a question regarding AB MircoLogix 1100 Ethernet port IP configuration.
As per the ML1100 User Manual (1763-UM001F, page227), there are two ways to configure the MicroLogix 1100 Ethernet channel 1.
•via a BOOTP or DHCP request at controller powerup
•manually setting the configuration parameters using RSLogix 500 Programming Software
I have successfully configure the Ethernet Port by above methods. however, I found a company internal document suggesting the IP address of ML1100 can be modified by using RSLinx.
I have the ML1100 (IP configured, BootP & DHCP disabled) shown on RSLinx, but when I right click on the ML1100; there is no "Module Configuration" option appeared.
The version of my RSLinx (Classic Lite)is 2.59.01 CPR9 SR5 and the ML1100 is 1763-L16BBB B/14.00.
ML1100 is directly connected to my laptop with a single Ethernet cable.
Can anyone tell me if RSLinx can be used to configure IP address of ML1100?
Any suggestion is appreciated.:nodi:
Regards,
Freshmeat