Hi,
I got an issue while trying to communicate with the MSG instruction from the MicroLogix 1100 to the Kinetix 300. The MSG gives me the error code "d6 - Connection timed out by network".
I tried setting the MSG up as shown in the kinetix manual page 216.
In the sample code libary i tried to download the K300 ML1400 sample code (changed controller to a ML1100), but it dont work either. I get the same error "d6".
I am able to ping both devices, so network should be ok.
Any ideas what could be wrong?
I got an issue while trying to communicate with the MSG instruction from the MicroLogix 1100 to the Kinetix 300. The MSG gives me the error code "d6 - Connection timed out by network".
I tried setting the MSG up as shown in the kinetix manual page 216.
In the sample code libary i tried to download the K300 ML1400 sample code (changed controller to a ML1100), but it dont work either. I get the same error "d6".
I am able to ping both devices, so network should be ok.
Any ideas what could be wrong?