bwwestbrook
Member
I have a Micrologix 1200 (1762-L40BXB) that is currently connected with a Panelview 550 via DF1 serial port.
I need to now communicate to a Controllogix Processor using Ethernet.
I would like to know if I can split the serial connection to go to both my Panelview 550 and a new 1761-NET-ENI. If so what cabling and/or module would I need?
Thanks
I need to now communicate to a Controllogix Processor using Ethernet.
I would like to know if I can split the serial connection to go to both my Panelview 550 and a new 1761-NET-ENI. If so what cabling and/or module would I need?
Thanks
Last edited: