Hi there,
I am trying to get an ADAM 4561 converter to talk via RS232 DF1 to a Micrologix 1400.
I know that some USB/RS232 converters simply won't support Autoconfigure on DF1, so Ive tried the default settings of ML1400 DF1 parameters; 19200 baud, 8 data bits, 1 stop bit, no parity, CRC error checking, but no luck.
Does anyone else use this device / know the configuration?
Regards,
I am trying to get an ADAM 4561 converter to talk via RS232 DF1 to a Micrologix 1400.
I know that some USB/RS232 converters simply won't support Autoconfigure on DF1, so Ive tried the default settings of ML1400 DF1 parameters; 19200 baud, 8 data bits, 1 stop bit, no parity, CRC error checking, but no luck.
Does anyone else use this device / know the configuration?
Regards,