I have an AB Micrologix 1766-L32BXB which has 6 FET and 6 relay outputs. My problem is that I just noticed that the solenoid valves (ten total) I have require Sink outputs, these valves are mounted on a manifold so I can't do anything about it. So I can use the 6 relay outputs but don't know if the FET outputs can be wired as sink, Can they? As always the machine is needed right away so buying a relay module is not an option.
If the FETs can't be used as sink then I'll go with some relays to drive the valves, which represents another problem; I've no space to mount them!
Hope you guys can help with this.
If the FETs can't be used as sink then I'll go with some relays to drive the valves, which represents another problem; I've no space to mount them!
Hope you guys can help with this.