stattiktricity
Member
Okay so I just went into my ML1500 and mistakenly changed a comm setting for channel 0 or 1 channel config section of the programming software RSL500 and it prompted me to apply or dont apply comm setting. Now I cant get back online with it after applying. I am trying to set up a prosoft PLX51-df1-ENI converter in place of a ab ENI module that failed and have had 0 success other than successfully messing up the comms on the ML1500. Any help to get me back talking again and then getting this pro soft converter going would be appreciated. I am using the comm 0 for hmi and programming and the side port (1l to command a drive so its a little different than a normal setup. Thanks,
John
John