Hi,
I'm working with PLC S7 313C 2DP and with micromaster 420.
I need to connect them via profibus but now when I'm trying to configure with Simatic Manager, I always get errors from the micromaster.
I set the CB address on the micromaster through the P value P0918.
I've given it there the address 3. So in my simatic manager, I say that mm is connected at profibus with profibus address 3. The dip switches on profibus module are all on 0 so the P-value is the main one.
I download the configuration and get error on my PLC. I'm getting desperate here and hope someone can help me.
regards
FlatLiner
I'm working with PLC S7 313C 2DP and with micromaster 420.
I need to connect them via profibus but now when I'm trying to configure with Simatic Manager, I always get errors from the micromaster.
I set the CB address on the micromaster through the P value P0918.
I've given it there the address 3. So in my simatic manager, I say that mm is connected at profibus with profibus address 3. The dip switches on profibus module are all on 0 so the P-value is the main one.
I download the configuration and get error on my PLC. I'm getting desperate here and hope someone can help me.
regards
FlatLiner