Mitsubishi FX0N-60MT

blux

Member
Join Date
Feb 2010
Location
Manila
Posts
3
hi, i'm quite new here.
my friend gave me this plc to be used on my project study.
along with the plc he gave me softaware,SWOPC-FXGP/WINE.
I am not familiar with mitsubuishi plc. so i have these problems.
i don't have and i can't find any hardware manual.so i can wire the plc correctly.
also, the help of the software doesnt help me at all. can you link me to a guide on mitsubihisi programming?is this have a simulator?
is this unit have internal timer?

thanks,all replies will be appreciated.
 
I do have electronic versions of the FX1N hardware manual and the programming manual for GX-Developer if they are of help. However, the hardware manual is 1.4mb and the programming manual is 6.8mb, so if you need them write to me at [email protected] as I don't want to overtax the site.
 
is there a trial verison for gx developer and simulator?if so can you give me link, thanks.
(googled it already but didn't find any)
 
FX0N still works great...though not as powerful as the fx1n or 2n or 3u series... for manual jst follow d link posted by mickey. I assume you also have the prog cable... SC-09
 

Similar Topics

Hope anyone can help me. I need to write a VB program to read the signal output from Mitsubishi FX0N-60MR-ES PLC. I have bought a FX0N-232ADP but...
Replies
1
Views
2,065
I am new in MITSUBISHI PLC. So I am not sure about backup battery whether it is used in MELSEC FX0N-60MR-ES. I opened the front cover to look for...
Replies
2
Views
6,210
im looking for the numbers of the terminal board of a FX0N-20-MR-ES PLC can someone help me out cause i cant find them at google
Replies
0
Views
1,807
Hi everyone This should be an easy one. I have to upload the program from a mitsubishi FX0N PLC but I cant connect to it. I have a F2-232CAB...
Replies
2
Views
3,480
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
128
Back
Top Bottom