Dave Steer
Member
Hi everyone
This should be an easy one. I have to upload the program from a mitsubishi FX0N PLC but I cant connect to it. I have a F2-232CAB plugged into a FX-20P-CADP lead, so my first question is this the correct leads?
I have FX-Win, Medoc and Melsoft software, but none would allow me to connect to the PLC. I have a lot of different manufactures software on my laptop, and havent used Mitsubishi for a long time so I have a feeling that the software is conflicting. I just want to check before I tell my boss he needs to buy me another laptop. The only other thing I could think of was does the PLC need to be in program mode to upload? The PLC is on a hospital generator system, so putting it into program mode is not an option.
Thanks everyone
Dave
This should be an easy one. I have to upload the program from a mitsubishi FX0N PLC but I cant connect to it. I have a F2-232CAB plugged into a FX-20P-CADP lead, so my first question is this the correct leads?
I have FX-Win, Medoc and Melsoft software, but none would allow me to connect to the PLC. I have a lot of different manufactures software on my laptop, and havent used Mitsubishi for a long time so I have a feeling that the software is conflicting. I just want to check before I tell my boss he needs to buy me another laptop. The only other thing I could think of was does the PLC need to be in program mode to upload? The PLC is on a hospital generator system, so putting it into program mode is not an option.
Thanks everyone
Dave