fithol
Member
Good evening,
Let me introduce myself, I am a 70 year old retiree, my name is Guy
During my professional life I programmed plcs of various brands without too much problem, but the programs were simple.
Today, I find myself with a mitsubishi fx1s on a small packaging machine that I would like to put in order.
In the code there are two entries X0 and X1 witch do not appear in the ladder. I'm lost, these two inputs are used to detect a contrast mark on the packaging film.
If a member is ready to take a look I will send them the code
I use GX developer
Thanks in advance
Guy
Let me introduce myself, I am a 70 year old retiree, my name is Guy
During my professional life I programmed plcs of various brands without too much problem, but the programs were simple.
Today, I find myself with a mitsubishi fx1s on a small packaging machine that I would like to put in order.
In the code there are two entries X0 and X1 witch do not appear in the ladder. I'm lost, these two inputs are used to detect a contrast mark on the packaging film.
If a member is ready to take a look I will send them the code
I use GX developer
Thanks in advance
Guy