shaun croman
Member
I have a Mitshubishi FX2n with an FX2nc-enet-apd ethernet card
which I am trying to connect 2 concurrent opc servers to
Problem is that the ethernet card will only accept coms on one port (1024) so if both OPC servers try to connect- one times out
For redundancy purposes I need tghe two opc servers otherwise I would just bridge it
I am looking at an alternative solution using something like redlions datastation or an **** device to do the opc bridging
I would be grateful if anyone has had experience of a similar situation before I commit to purchasing
any feed back would be welcome
which I am trying to connect 2 concurrent opc servers to
Problem is that the ethernet card will only accept coms on one port (1024) so if both OPC servers try to connect- one times out
For redundancy purposes I need tghe two opc servers otherwise I would just bridge it
I am looking at an alternative solution using something like redlions datastation or an **** device to do the opc bridging
I would be grateful if anyone has had experience of a similar situation before I commit to purchasing
any feed back would be welcome