Hi, I am wanting to get an FX2N-128 to communicate with Intouch over RS485 using a FX2N-485-BD add-in comms card, FX485-232 converter and using the DASFXNET driver. Can anyone help me with what the GX-Developer port settings need to be on the PLC side? - The OEM won't release the keyword to access the PLC to get to the config setup and will only provide us with an updated eeprom, so I'd like to make sure I get them to put the correct settings in there before sending it half way around the globe.
Thanks,
Grant Stempher
Thanks,
Grant Stempher