Mas01
Member
Thanks for this parky. From what you describe, is no wonder that the operators don't use the target speed function if it's difficult to control.
For info X214 (cyclic control) goes TRUE when a physical key is moved to the ON position. None of the operators ever touch that key and leave it in the OFF position! The original operators have retired and the current ones were told about the target speed being difficult to control.
I will get more info etc on Monday.
For info X214 (cyclic control) goes TRUE when a physical key is moved to the ON position. None of the operators ever touch that key and leave it in the OFF position! The original operators have retired and the current ones were told about the target speed being difficult to control.
I will get more info etc on Monday.