Daryl
Guest
D
We are setting up a new ethernet network using Cimplicity 6.1 SP 3, Topserver and Mitsubishi Q01 PLCs. We have everything up and running fine but when we disconnect and then reconnect the OPC server we lose most of our connections. Never the same PLCs drop out either, very random. The only way we have found to reconnect is to reset the PLCs.
I called Topserver and they say that since the OPC server has had successful connections it's not their issue. They suspect that the PLC is closing a port or socket and not allowing the reconnect until reset. I've tried Mitsubishi support but all I get there is an answering machine with no response back.
Any suggestions or experiences would be appreciated.
Thanks
I called Topserver and they say that since the OPC server has had successful connections it's not their issue. They suspect that the PLC is closing a port or socket and not allowing the reconnect until reset. I've tried Mitsubishi support but all I get there is an answering machine with no response back.
Any suggestions or experiences would be appreciated.
Thanks