prateek1190
Member
Hi guys,
I'm trying to read the program from Mitsubishi Q2AS(H) PLC. The communication is fine. But while uploading program, selection for Parameter and Program is not appearing. Only option of device memory is there. So I'm unable to read program.
So what can I do so that I can read the program+ parameter from the PLC.
Regards,
Prateek
I'm trying to read the program from Mitsubishi Q2AS(H) PLC. The communication is fine. But while uploading program, selection for Parameter and Program is not appearing. Only option of device memory is there. So I'm unable to read program.
So what can I do so that I can read the program+ parameter from the PLC.
Regards,
Prateek