Ml1400 pto

rikster_2

Lifetime Supporting Member
R
Join Date
May 2011
Location
Indiana
Posts
9
Micrologix 1400 PTO function file. I set ADI to “1”. Right clicked ADP, selected “set independent accel/decel value location”, and entered L9:0, then OK. Value is now 90000(h).

What logic needs added and where do I view/change accel values and decel values?
 

Similar Topics

C
ML1400 - Can I use a 1762-OB8 for PWM, PTO
Hi all, I have a Micrologix 1400 BWAA and the correct software for it. I would like to learn to program PWM to control a stepper. I am currently...
Replies
3
Views
2,602
Chris12345
C
Y
A-B ML1400 PTO control X-Y screws with coordinates
Hello, I have a project using 2 stepper motors for X-Y table control, with following items: ML1400 PLC (1766-L32BXB); HMI; 100mm x 100mm lead...
Replies
0
Views
2,009
yuez
Y
J
ML1400 PTO Accel/Decel Pulses Independent
Hi everyone, I setting a PTO instruction with different Accel/Decel in ML1400 (ADI=1). According to the manual: “If separate acceleration and...
Replies
5
Views
2,572
Jaimeeduardo705
J
L
ML1400 Event on PTO Output
Yep, I'm hammering this topic :shutit: For this application, we want the operator to be able to adjust when something happens based on a certain...
Replies
2
Views
2,101
lostcontrol
L
L
ML1400 PTO attributes
Hi, Following on from previous post, I am setting up a ML1400 with Pulse Outputs. Found a headache in development, that if a rung as a PTOX...
Replies
4
Views
3,281
lostcontrol
L
Back
Top Bottom