TheWaterboy
Lifetime Supporting Member + Moderator
I have a temporary (yea right) need to provide a 4-20mA analog signal into a PLC5 from a new modbus only device. I can do this if I dedicate an ML1400 to it, but I'm looking for a small inexpensive din rail mounted convertor that can poll the modbus register and deliver mA output based on that value.
Only one I found so far this morning was a SCADALINK DC100 and that looks pricey.
I had an LTS6 from Laurel systems but it is a slave device and the meter can't be a master so that wont work.
Any suggestions?
Only one I found so far this morning was a SCADALINK DC100 and that looks pricey.
I had an LTS6 from Laurel systems but it is a slave device and the meter can't be a master so that wont work.
Any suggestions?