Sliver
Member
my manual says...
..and the following (USA) data format:
4XXXX The control register
Bit 1 (MSB) 1 = set clock values
Bit 2 1 = read clock values
and so on as mentioned in previous posts.
Is it possible that the non-USA data format is in play here?
Brian.
..and the following (USA) data format:
4XXXX The control register
Bit 1 (MSB) 1 = set clock values
Bit 2 1 = read clock values
and so on as mentioned in previous posts.
Is it possible that the non-USA data format is in play here?
Brian.
Last edited: