MOXA NPort 1240 (USB-to-COM) for PLC programming

Kirill

Member
K
Join Date
Jun 2003
Posts
4
Hi,somebody try use USB-to-COM converter NPort 1240 by MOXA for PLC programming (OMRON,Mitsubishi,Siemens)? It possible or not?
 
No but Vivanco's serial twin tower modul USB. It have configured as COM2-port in my HP-laptop and works well.
I believe that Moxa is equal.
 

Similar Topics

K
Keepware OPC to MOXA NPort 5210A
Hej Guys. Is anyone that has knowledge about setting up communication via ethernet from Keepware OPC server to MOXA NPORT? the keepserver keep...
Replies
2
Views
2,016
Dravik
D
L
Moxa Nport 5110 with Allen-Bradley SLC-500 PLC basic card
Hello, Here we have the mentionned PLC which had, in the beginning, a serial line printer connected to one of the serial port of the basic module...
Replies
0
Views
3,801
lingenieur
L
D
Communicating MOXA NPort 5110 to CPU315-2DP through CP343-1
I am trying to get data from a Serial Barcode scanner from a Siemens S7-300 CPU 315-2DP . I am using CP343-1 ethernet Interface Card and a MOXA...
Replies
3
Views
2,962
Pudden
P
N
Not able to communicate with Moxa NPort 5110
We have Cimplicity 6.1 HMI software (SP4) and we would like to communicate with Gravo Tech make punching machine. So we want to use Moxa Nport...
Replies
0
Views
2,401
nitin.salvi
N
J
CP 340 via ASCII to MOXA NPort 5230
Hello, I currently using a Siemens CPU 315-2 PN/DP (with Step7) with I/O cards. All are working fine. I now want to add a CP 340-RS232C to...
Replies
1
Views
2,327
jay428
J
Back
Top Bottom