Hi folks,
I am writing with request for HELP.
At our plant a request for modification of HMI project appears.
Unforunately when the compilation stars it ends with more than 350 errors.
Problem might be with some kind of driver: SIMATIC NC comunication driver
Machine has a 4 axes robot and the tags in red are for that robot.
The robot is controled by FM357-2
All errors are "INVALID DATA TYPE"
Just one error differs. It is for the driver above.
Any ideas are very much appreciated.
I attached log file also.
I am writing with request for HELP.
At our plant a request for modification of HMI project appears.
Unforunately when the compilation stars it ends with more than 350 errors.
Problem might be with some kind of driver: SIMATIC NC comunication driver
Machine has a 4 axes robot and the tags in red are for that robot.
The robot is controled by FM357-2
All errors are "INVALID DATA TYPE"
Just one error differs. It is for the driver above.
Any ideas are very much appreciated.
I attached log file also.