Hello automation experts,
I kindly ask your help about the pneumatic valve shown in the attached image.
The valve is 3/2 which means it should have 3 ports in total and only two possible ways of air directions, but in the manufacturer's catalog and on the valve, there are four holes. Can you please explain me what are ports 1, 2 and 3 on the drawing?
If possible, can you please write me port numbers on A, B C and D that are shown in the image?
It looks like to me that D = 1, A = 3 and C = 2????
Thank you!
I kindly ask your help about the pneumatic valve shown in the attached image.
The valve is 3/2 which means it should have 3 ports in total and only two possible ways of air directions, but in the manufacturer's catalog and on the valve, there are four holes. Can you please explain me what are ports 1, 2 and 3 on the drawing?
If possible, can you please write me port numbers on A, B C and D that are shown in the image?
It looks like to me that D = 1, A = 3 and C = 2????
Thank you!