Hi,
I am pretty good with Rockwell gear but I am fairly green when it comes to Siemens and I am having difficulty finding where an analog ASi input is being scaled in my program.
The input is for a 4-20ma Pressure transducer and it is connected on a ASi network via Profibus.
I have the code and the drawings here and if some could show me how to translate the physical device on the ASi network into it's input in the code and how to find it that would be fantastic.
I have attached two photos showing the probe and the ASi module it's connected to. From that you should be able to tell where it would be located in the code. Unfortunately for me I lack the experience to find it in the program. Could someone explain the process needed to identify an ASi input like this in the code.
I put the archived project on my google drive for you to look at. Link below.
https://drive.google.com/file/d/0B-AsBKwF6UD8NGJmUjlPbHR6WmM/view?usp=sharing
Thanks,
Tony.
I am pretty good with Rockwell gear but I am fairly green when it comes to Siemens and I am having difficulty finding where an analog ASi input is being scaled in my program.
The input is for a 4-20ma Pressure transducer and it is connected on a ASi network via Profibus.
I have the code and the drawings here and if some could show me how to translate the physical device on the ASi network into it's input in the code and how to find it that would be fantastic.
I have attached two photos showing the probe and the ASi module it's connected to. From that you should be able to tell where it would be located in the code. Unfortunately for me I lack the experience to find it in the program. Could someone explain the process needed to identify an ASi input like this in the code.
I put the archived project on my google drive for you to look at. Link below.
https://drive.google.com/file/d/0B-AsBKwF6UD8NGJmUjlPbHR6WmM/view?usp=sharing
Thanks,
Tony.